SCS-G series filters are absolute precision polyethersulfone pleated filter filters, which can remove more bacteria and particles under high flow rate and low pressure drop.
Product features
Asymmetric membrane pore structure with high dirt-holding capacity
100% integrity test to ensure absolute sterilization effect
No foreign substances such as adhesives
Highly durable PES, re-sterilizable
Applications
Buffer filtration
Colloidal or viscous liquid filtration
Pre-chromatography/filtration protection filtration
Sterile filtration of water for pharmaceutical use
Biological product intermediates and bulk filtration
Flow curves
MoC | |
Membrane material | Polyether sulfone |
Center rod/housing/end cap | Polypropylene |
Supporting layer | Polypropylene |
Sealing ring | Refer to ordering information |
Surface area | 0.6m2/10 inch |
Working condition | |
Max. working temperature | Dual layer≤85℃(0.21MPa) |
Single layer≤85℃(0.05MPa) | |
Max. working pressure difference | 0.50 MPa（25℃） |
0.25 MPa（80℃） | |
Autoclave | 121℃ (30 min, 5 times) |
Biosafety | ||
Endotoxin | ＜0.25EU/ml | |
Biosafety | Meets USP<87> and USP<88> biosafety requirements | |
Product number key of low diffusion hydrophilic PES disc filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Inlet/Outlet | Sterilization |
DS=Disc filter | SCS=Hydrophilic PES | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 912=0.1+0.2 924=0.2+0.45 944=0.45+0.45 946=0.45+0.65 Note: For dual-layer filter, pore sizes can be freely combined | G= Low diffusion | 02=2 | 2H=1/4" HB | G=Gamma irradiated, re-autoclaving is no longer tolerated F=Tolerate gamma irradiation only, but not yet irradiated None=Tolerant autoclaving only, but not yet autoclaved |
Product number key of low diffusion hydrophilic PES CA series capsule filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet | Sealing ring material | Sterilization |
CA=Diameter 110 capsule filter | SCS=Hydrophilic PES | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 912=0.1+0.2 924=0.2+0.45 944=0.45+0.45 946=0.45+0.65 Note: For dual-layer filter, pore sizes can be freely combined | G= Low diffusion | 05=5 10=10 20=20 30=30 | L=Up-in & down-out | H=1"-1.5" TC | H=1"-1.5" TC F=1/2" HB | S=Silicone E=EPDM V=Fluorelastomer | G=Gamma irradiated, re-autoclaving is no longer tolerated F=Tolerate gamma irradiation only, but not yet irradiated None=Tolerant autoclaving only, but not yet autoclaved |
Technical parameter of low diffusion hydrophilic PES CA series capsule filter
Material | Series | Size code | Single/dual layer | Surface area（㎡）≥ | Pure water flow 0.2 μm ΔP=0.01MPa | Diffusion flow ml/min（0.2 μm） | Bubble point MPa | Bubble point MPa |
Low diffusion hydrophilic PES | CA capsule filter | G05 | Single layer | 0.3 | ≥4.5L/min | ≤15@0.28MPa | ≥0.34 （0.2 μm） | ≥0.24 （0.45μm） |
G10 | Single layer | 0.6 | ≥9L/min | ≤25@0.28MPa | ||||
G20 | Single layer | 1.2 | ≥18L/min | ≤50@0.28MPa | ||||
G30 | Single layer | 1.8 | ≥27L/min | ≤75@0.28MPa | ||||
G05 | Dual layer | 0.25 | ≥2.5L/min | ≤12@0.28MPa | ||||
G10 | Dual layer | 0.5 | ≥5L/min | ≤20@0.28MPa | ||||
G20 | Dual layer | 1 | ≥10L/min | ≤40@0.28MPa | ||||
G30 | Dual layer | 1.5 | ≥15L/min | ≤60@0.28MPa |
Product number key of low diffusion hydrophilic PES CB series capsule filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet | Sterilization |
CB=Diameter 70 capsule filter | SCS=Hydrophilic PES | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 912=0.1+0.2 924=0.2+0.45 944=0.45+0.45 946=0.45+0.65 Note: For dual-layer filter, pore sizes can be freely combined | G= Low diffusion | H1=1 (minor Dia.) 01=1(wide Dia.) 1H=1.5 02=2.5 05=5 | L=Up-in & down-out | A=1/4"NPT D=1/4" HB E=3/8" HB F=1/2" HB G=1/2" TC H=1-1.5" TC J=1/4-1/2" HB | A=1/4"NPT D=1/4" HB E=3/8" HB F=1/2" HB G=1/2" TC H=1-1.5" TC J=1/4-1/2" HB | G=Gamma irradiated, re-autoclaving is no longer tolerated F=Tolerate gamma irradiation only, but not yet irradiated None=Tolerant autoclaving only, but not yet autoclaved |
Technical parameter of low diffusion hydrophilic PES CB series capsule filter
Material | Series | Size code | Single/dual layer | Surface area（㎡）≥ | Pure water flow 0.2 μm ΔP=0.01MPa | Diffusion flow ml/min（0.2 μm） | Bubble point MPa | Bubble point MPa |
Low diffusion hydrophilic PES | CB capsule filter | GH1 | Single layer | 0.02 | ≥0.25L/min | ≤2.4@0.28MPa | ≥0.34 （0.2 μm） | ≥0.24 （0.45 μm） |
G01 | Single layer | 0.04 | ≥0.5L/min | ≤4@0.28MPa | ||||
G1H | Single layer | 0.06 | ≥0.9L/min | ≤5.5@0.28MPa | ||||
G02 | Single layer | 0.12 | ≥1.8L/min | ≤7@0.28MPa | ||||
G05 | Single layer | 0.2 | ≥3.3L/min | ≤10@0.28MPa | ||||
GH1 | Dual layer | 0.015 | ≥0.125L/min | ≤1.8@0.28MPa | ||||
G01 | Dual layer | 0.03 | ≥0.25L/min | ≤3.0@0.28MPa | ||||
G1H | Dual layer | 0.05 | ≥0.5L/min | ≤4.0@0.28MPa | ||||
G02 | Dual layer | 0.10 | ≥1L/min | ≤5.64@0.28MPa | ||||
G05 | Dual layer | 0.18 | ≥1.83L/min | ≤8.9@0.28MPa |
Product number key of low diffusion hydrophilic PES cartridge
Membrane material | Pore size (μm) | Type | Length (inch) | Connection type | Sealing type | Sealing ring material |
SCS=Hydrophilic PES | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 912=0.1+0.2 924=0.2+0.45 944=0.45+0.45 946=0.45+0.65 Note: For dual-layer filter, pore sizes can be freely combined | G=Low diffusion | 05=5 10=10 20=20 30=30 40=40 | A=226 B=226 steel liner D=222 E=222 steel liner H=215 K=220 | P=Flat cap R=“8” shape tail K=220 | S=Silicone E=EPDM V=Fluorelastomer |
Technical parameter of low diffusion hydrophilic PES cartridge
Material | Series | Size code | Single/dual layer | Surface area（㎡）≥ | Pure water flow 0.2 μm ΔP=0.01MPa | Diffusion flow ml/min（0.2 μm） | Bubble point MPa | Bubble point MPa |
Hydrophilic PES | Cartridge | G05 | Single layer | 0.3 | ≥4.5L/min | ≤15@0.28MPa | ≥0.34 （0.2 μm） | ≥0.24 （0.45 μm） |
G10 | Single layer | 0.6 | ≥9L/min | ≤25@0.28MPa | ||||
G20 | Single layer | 1.2 | ≥18L/min | ≤50@0.28MPa | ||||
G30 | Single layer | 1.8 | ≥27L/min | ≤75@0.28MPa | ||||
G40 | Single layer | 2.4 | ≥36L/min | ≤100@0.28MPa | ||||
G05 | Dual layer | 0.25 | ≥2.5L/min | ≤12@0.28MPa | ||||
G10 | Dual layer | 0.5 | ≥5L/min | ≤20@0.28MPa | ||||
G20 | Dual layer | 1 | ≥10L/min | ≤40@0.28MPa | ||||
G30 | Dual layer | 1.5 | ≥15L/min | ≤60@0.28MPa | ||||
G40 | Dual layer | 2 | ≥20L/min | ≤80@0.28MPa |
Copyright © Shanghai Duoning Biotechnology Co., Ltd. All Rights Reserved Sitemap | Technical Support: 
Message-
